Boot Sequence

From meteobridge
Revision as of 16:05, 17 January 2021 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


On power-on Meteobridge device runs through a couple of different phases where you can interact by pressing the button on top of the unit (TL-MR3020 or TL-WR703N) or at the back behind a pin hole (WL-330N3G). Picture below tries to illustrate what these phases are, how to recognize them and what options you have being there.

Operational-flow-chart.png

</translate>