:Preparing Hardware/40/en
From meteobridge
Revision as of 12:54, 28 January 2018 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
Having done that flashing the device is very simple:
- Connect the MR3020v3 with an Ethernet cable to the same LAN your TFTP server is in
- then press the large button on the top of the MR3020v3 and keep it pressed
- connect the MR3020 to power (keep the button pressed)
- wait 10 seconds an then release the button
Now the MR3020 is flashed to Meteobridge. When everything works fine the MR3020 will start blinking slowly with the large LED after a while, will then start fast blinking and will end up with the large LED steady on after about 2 minutes. Then you are done.
