:Getting Started/27/en

From meteobridge
Revision as of 09:18, 21 July 2013 by FuzzyBot (Talk | contribs) (Importing a new version from external source)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Flash Again

When you need to flash a new Meteobridge firmware to your TL-MR3020 or TL-WR703N, you can do that by going to "Setup Network" tab on Meteobridge web interface und pressing "Expert Mode (OpenWrt)" button. This will bring you to the openwrt SW stack below meteobridge application software stack. If your device cannot load Meteobridge application stack from the Internet for some reason, you can also directly access openwrt web interface by browsing to "http://ip-of-your-meteobridge-device/cgi-bin/luci". Login with your Meteobridge password and goto "System" tab. Select sub tab "Backup / Flash Firmware" and use offered "Flash new firmware" section. Unmark "keep settings" option and start flashing. Keep device connected to power, it will restart automatically. If you have a WL-330N3G, this always needs to be flashed with the TFTP environment as in setup section for that device explained.

Retrieved from "https://wiki.meteobridge.com/wiki/index.php?title=:Getting_Started/27/en&oldid=2353"