:Templates/3/en

Sensors

These sensors are defined in Meteobridge.

• th0temp: outdoor temperature in degrees Celsius
• th0hum: relative outdoor humidity as percentage
• th0dew: outdoor dew point in degrees Celsius
• th0heatindex: outdoor heat index in degrees Celsius
• thb0temp: indoor temperature in degrees Celsius
• thb0hum: indoor humidity as percentage
• thb0dew: indoor dewpoint in degrees Celsius
• thb0press: station pressure in hPa
• thb0seapress: normalized pressure (computed to sea level) in hPa
• wind0wind: wind speed in m/s
• wind0avgwind: average windspeed in m/s (time used for average depends on station)
• wind0dir: wind direction in degress (0° is North)
• wind0chill: wind chill temperature in degrees Celsius
• rain0rate: rain rate in mm/h
• rain0total: rain fall in mm
• uv0index: uv index
• sol0rad: solar radiation in W/m^2
• sol0evo: evapotranspiration in mm (only supported on Davis Vantage stations)

If a sensor is not there or data of sensor has passed the "tolerated data age" interval, Meteobridge will not provide data for it and will present the value defined as "replacement". If no replacement is given, variable will not be converted into data but will stay as is. As some weather stations do also report low battery status, there are also sensors thb0lowbat, th0lowbat, etc available. These sensors provide current low bat status (0 = no low battery, 1 = low battery) for each of the base sensors.