Difference between revisions of ":Add-On Services/3/en"
From meteobridge
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 3: | Line 3: | ||
* '''id''': Unique ID of sensor, consists of a sensor type description shortcut followed by a number, which is always "0" in Meteobridge, as additional sensors are not supported | * '''id''': Unique ID of sensor, consists of a sensor type description shortcut followed by a number, which is always "0" in Meteobridge, as additional sensors are not supported | ||
* '''temp''': temperature in degrees Celsius (with one decimal) | * '''temp''': temperature in degrees Celsius (with one decimal) | ||
| − | * '''hum''': relative humidity in percent (no decimals) | + | * '''hum''': relative humidity in percent (no decimals) with humidity sensors. With leaf and soil sensors unit is wetness or centibar. |
* '''dew''': dew point temperature in degrees Celsius (with one decimal) | * '''dew''': dew point temperature in degrees Celsius (with one decimal) | ||
* '''press''': station pressure (without altitude correction) in hPa (with one decimal) | * '''press''': station pressure (without altitude correction) in hPa (with one decimal) | ||
Latest revision as of 14:20, 5 March 2016
Each sensor data record has a mandatory "date" and "id" parameter. The other parameters are sensor specific. Meaning of parameters is:
- date: UTC timestamp of reception of sensor data in format "YYYYMMDDhhmmss"
- id: Unique ID of sensor, consists of a sensor type description shortcut followed by a number, which is always "0" in Meteobridge, as additional sensors are not supported
- temp: temperature in degrees Celsius (with one decimal)
- hum: relative humidity in percent (no decimals) with humidity sensors. With leaf and soil sensors unit is wetness or centibar.
- dew: dew point temperature in degrees Celsius (with one decimal)
- press: station pressure (without altitude correction) in hPa (with one decimal)
- seapress: normalized pressure with altitude correction (also called sea level pressure) in hPa (with one decimal)
- fc: stations forecast code, if provided. As this has low evidence and also largely varies between stations, meteobridge does not recommend to make use of this data.
- rate: measured rain rate in mm per hour (with one decimal).
- total: current value of rain bucket counter, converted to mm (with one decimal).
- delta: additional rain fall in mm since previous readout of this data (with one decimal).
- wind: current average wind speed im m/s (with one decimal).
- gust: curent not avergaed wind speed in m/s (with one decimal).
- dir: wind direction in degrees (0-359, no decimals).
- chill: wind chill temperature in degrees Celsius (with one decimal).
- more to come...
