Difference between revisions of "Meteobridge PRO"

Revision as of 17:59, 28 November 2015 (view source) Admin (Talk | contribs) ← Older edit		Revision as of 18:00, 28 November 2015 (view source) Admin (Talk | contribs) Newer edit →
Line 20:		Line 20:
	You can find a datasheet about the Meteobridge PRO [http://files.meteobridge.com/files/meteobridgepro%20-%20datasheet.pdf here], which should summarize the key features on two pages.		You can find a datasheet about the Meteobridge PRO [http://files.meteobridge.com/files/meteobridgepro%20-%20datasheet.pdf here], which should summarize the key features on two pages.
−	Units will be ready to hit the markets in January. By that the price tags will also be finalized. There will be two versions, one with the Vantage RF receiving capabilities red caps, see picture) and one without (which will have black caps). Units always come fully licensed, license transfer from standard Meteobridges is not planned.	+	Units will be ready to hit the markets in January. By that the price tags will also be finalized. There will be two versions, one with the Vantage RF receiving capabilities and the shiny red caps, see picture) and one without (which will have black caps). Units always come fully licensed, license transfer from standard Meteobridges is not planned.
	The introduction of the PRO will not stop further development of the standard Meteobridge. They share 90% of the code and will be both further developed, of course with the PRO offering much more options.		The introduction of the PRO will not stop further development of the standard Meteobridge. They share 90% of the code and will be both further developed, of course with the PRO offering much more options.
	</translate>		</translate>

---

Revision as of 18:00, 28 November 2015

<languages /><translate>

Coming Soon - Meteobridge PRO

With the success of Meteobridge the question how to put this to the next level of obviously on the table. Our answer is to get independent from third party router platforms and to build a platform that ideally suits the need of a Personal Weather Server. Doing so the design goals were easy to set...

• keep low power foot print and find ways to monitor power use
• keep size real tiny
• get rid of necessary USB hubs
• add permanent storage for local data persistence
• integrate RF features to directly readout data from Davis sensors
• equip with proper RF and WiFi antenna
• add a database for permanent storage of data
• allow flexible data exports, where data can be picked up from SMB share or sent via mail of FTP
• have some sensors in the box itself (pressure, temp, hum)
• some kind of status and data display would be great
• sensor data graphing features out of the box would be great
• and please, no cheap plastics ;-)

After a quite some months of prototyping and new HW/SW design we are going to release this unique new bundle of dedicated hardware and advanced Meteobridge software as the new meteobridge PRO.

You can find a datasheet about the Meteobridge PRO here, which should summarize the key features on two pages.

Units will be ready to hit the markets in January. By that the price tags will also be finalized. There will be two versions, one with the Vantage RF receiving capabilities and the shiny red caps, see picture) and one without (which will have black caps). Units always come fully licensed, license transfer from standard Meteobridges is not planned.

The introduction of the PRO will not stop further development of the standard Meteobridge. They share 90% of the code and will be both further developed, of course with the PRO offering much more options. </translate>