Difference between revisions of ":Preparing Hardware/30/en"
From meteobridge
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Flashing Meteobridge Firmware to DIR-505== | ==Flashing Meteobridge Firmware to DIR-505== | ||
D-Link DIR-505 provides a "Router Recovery Mode", but firmware update through this does not work with todays browsers. Therefore, it is recommended to use the firmware update function of the DIR-505's stock firmware. This is done in a few simple steps. | D-Link DIR-505 provides a "Router Recovery Mode", but firmware update through this does not work with todays browsers. Therefore, it is recommended to use the firmware update function of the DIR-505's stock firmware. This is done in a few simple steps. | ||
| − | * Download Meteobridge firmware to your Laptop: [http:// | + | * Download Meteobridge firmware to your Laptop: [http://connect.meteobridge.com/files/meteobridge-dir-505-v1.3.bin meteobridge-dir-505-v1.3.bin] (or [http://connect.meteobridge.com/files/meteobridge-dir-505l-v1.3.bin meteobridge-dir-505l-v1.3.bin] if you have a DIR-505L) |
* Set mode switch of DIR-505 to "Router/AP". | * Set mode switch of DIR-505 to "Router/AP". | ||
* Power-on DIR-505. | * Power-on DIR-505. | ||
Latest revision as of 22:14, 27 January 2018
Flashing Meteobridge Firmware to DIR-505
D-Link DIR-505 provides a "Router Recovery Mode", but firmware update through this does not work with todays browsers. Therefore, it is recommended to use the firmware update function of the DIR-505's stock firmware. This is done in a few simple steps.
- Download Meteobridge firmware to your Laptop: meteobridge-dir-505-v1.3.bin (or meteobridge-dir-505l-v1.3.bin if you have a DIR-505L)
- Set mode switch of DIR-505 to "Router/AP".
- Power-on DIR-505.
- Wait until LED switches to green.
- Connect your laptop with the WLAN the DIR-505 has setup. SSID and passphrase is on a separate card in the box the DIR-505 came with.
- Start browser on your laptop and direct to "http://192.168.0.1".
- Cancel internet setup dialog provided by stock firmware.
- Enter as user "admin" without password.
- Select "maintenance" tab from the horizontal menu.
- Select "firmware" tab from the vertical menu.
- Select downloaded Meteobridge firmware in "firmware upgrade" section and press upload button (picture on the left).
- DIR-505 checks if firmware is compatible and starts upgrading (picture on the right). When done DIR-505 reboots as a Meteobridge.
