Difference between revisions of ":Getting Started/27/en"
(Importing a new version from external source) |
(从外部源导入一个新的版本) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Flash Again== | ==Flash Again== | ||
| − | When you need to flash a new Meteobridge firmware to your TL-MR3020, TL-WR703N or DIR-505, you can do that by | + | When you need to flash a new Meteobridge firmware to your TL-MR3020, TL-MR3040, TL-WR703N or DIR-505, you can do that by calling the URL "http://ip-of-your-meteobridge/cgi-bin/fwupdate.cgi". This will shutdown some running services and will bring you to the openwrt SW stack below Meteobridge application software stack. If your device cannot load Meteobridge application stack from the Internet for some reason, you can also directly access openwrt web interface by browsing to "http://ip-of-your-meteobridge-device/cgi-bin/luci". Login with your Meteobridge password and go to "System" tab. Select sub tab "Backup / Flash Firmware" and use offered "Flash new firmware" section. Unmark "keep settings" option and start flashing. Keep device connected to power, it will restart automatically. |
If you have a WL-330N3G, this always needs to be flashed with the TFTP environment as in setup section for that device explained. | If you have a WL-330N3G, this always needs to be flashed with the TFTP environment as in setup section for that device explained. | ||
Latest revision as of 16:44, 31 January 2015
Flash Again
When you need to flash a new Meteobridge firmware to your TL-MR3020, TL-MR3040, TL-WR703N or DIR-505, you can do that by calling the URL "http://ip-of-your-meteobridge/cgi-bin/fwupdate.cgi". This will shutdown some running services and will bring you to the openwrt SW stack below Meteobridge application software stack. If your device cannot load Meteobridge application stack from the Internet for some reason, you can also directly access openwrt web interface by browsing to "http://ip-of-your-meteobridge-device/cgi-bin/luci". Login with your Meteobridge password and go to "System" tab. Select sub tab "Backup / Flash Firmware" and use offered "Flash new firmware" section. Unmark "keep settings" option and start flashing. Keep device connected to power, it will restart automatically. If you have a WL-330N3G, this always needs to be flashed with the TFTP environment as in setup section for that device explained.
